2019 and 2024 B.Tech RegulationsAcademic rulesReviewed 2026-09-28

KTU SGPA and CGPA: How the Averages Are Calculated

Both regulations calculate SGPA and CGPA as a credit-weighted average of grade points, not a plain average of your grades. The same formula serves both: the sum of credits times grade points, divided by the sum of credits. Failed, absent and eligibility-failed courses all carry zero grade points and stay in the denominator, which is why a single bad semester has a lasting effect on your CGPA. What differs between regulations is the percentage equivalent, and what is excluded from the calculation.

On this page

The formula

It is a weighted average, weighted by course credits. A four-credit course moves your average four times as much as a one-credit course with the same grade point.

SGPA = Σ(Ci × GPi) ÷ Σ(Ci), for the courses of that semester

CGPA = Σ(Ci × GPi) ÷ Σ(Ci), for the courses up to that semester

Where Ci is the credit assigned to the course and GPi is the grade point earned in it. The 2019 regulation sums over all courses in the curriculum of the semester, and over all courses up to the semester for which the CGPA is needed. The 2024 regulation states the same, defining n as the number of courses in the semester and m as the total number of courses considered in the CGPA calculation.

Failed courses drag your average down

This is the rule students most often get wrong in their own favour. The 2019 regulation says the failed and incomplete courses shall also be considered in the calculation, and that the failed courses shall also be accounted for. The 2024 regulation is equally direct: the calculation includes all grades including F, Ab and FE, and those grades are assigned a grade point of 0.

So a failed course is not removed from the average. It stays in the numerator as zero and stays in the denominator at full credit weight. The effect is that the longer you carry an unresolved failure, the more it costs you, because it keeps lowering the average without you taking any new course.

What is left out of the calculation

The main B.Tech average deliberately excludes certain work, because that work sits outside the degree you are averaging.

  • Courses that are not considered for the computation of SGPA and CGPA shall be explicitly listed in the curriculum (R 9.3(i)).
  • Courses pursued towards a Minor or an Honours specialization, and credits earned through challenge examinations, shall not be included in the calculation of SGPA or CGPA for the main B.Tech programme (R 9.3(ii)).
  • For lateral entry students, credits for the first and second semester courses shall not be included in the calculation of CGPA (R 9.2; 2019 R6.17 area).

Lateral entry students

A lateral entry student joins with a qualifying diploma or degree, so the credits from their first and second semester are not treated as KTU coursework. The 2024 regulation excludes the credits for the first and second semester courses from the CGPA calculation.

The 2024 regulation also makes the award visible on the paperwork. The Consolidated Grade Card and official transcript for B.Tech lateral entry students shall include the statement: "A total of 44 credits have been awarded based on the credits earned from the qualifying Diploma/Degree Programme."

Converting CGPA to a percentage

Both regulations give an equivalent percentage, and the two formulas are different. This is a reporting difference, not a rounding difference.

RegulationEquivalent percentage mark
2019 B.Tech Regulation10 × CGPA − 2.5
2024 B.Tech Regulation10 × CGPA

Getting your number officially

Under the 2024 regulation, a CGPA Certificate is issued reflecting the current Cumulative Grade Point Average, and the CGPA displayed on the certificate is the most up-to-date value as on the date of issue. A CGPA Calculation Statement is also provided, but only upon formal request by the student.

Neither document is automatic. The regulation provides a route to obtain either, so if you need a documented figure for an application or a transfer, request the statement rather than relying on a screenshot of an internal portal.

SGPA and CGPA across the two regulations

2019 B.Tech Regulation2024 B.Tech Regulation
FormulaΣ(Ci × GPi) ÷ Σ(Ci)Σ(Ci × GPi) ÷ Σ(Ci)
Failed and incomplete coursesConsidered in the calculationIncluded; F, Ab and FE are 0 grade points
Unearned credits under relaxationNot addressed in these clausesGrade point of 0 assigned and factored into SGPA and CGPA
Minor and Honours creditsNot addressed in these clausesExcluded from SGPA and CGPA for the main B.Tech (R 9.3(ii))
Challenge exam creditsNot addressed in these clausesExcluded from SGPA and CGPA (R 9.3(ii))
Lateral entryFirst and second semester credits not accounted forFirst and second semester credits excluded; 44 credits noted on the grade card and transcript (R 9.2)
Decimal placesNot specified in these clausesTwo decimal places (R 9.4)
Equivalent percentage10 × CGPA − 2.510 × CGPA

Worked examples

Why a failed course keeps costing you

A student has two courses worth 4 credits each. In course A the grade point is 8.0. In course B the grade point is 0 because the grade is F.

  1. Weighting by credits: the numerator is (4 × 8.0) + (4 × 0) = 32, and the denominator is 4 + 4 = 8.
  2. The SGPA is 32 ÷ 8 = 4.00.
  3. If the student had dropped course B from the calculation, the result would have been 32 ÷ 4 = 8.00, which is double the real answer.
  4. The grade card reports 4.00, because the regulation keeps failed courses in both the numerator and the denominator.

Result: The honest SGPA is 4.00, not 8.00. The failed course is not free; it is a full-credit-weight zero that stays on the record until the course is passed.

This is the single most common error in hand-calculated KTU averages, and it always flatters the student.

The same CGPA, two different percentages

A student has a CGPA of 7.50 and wants to know the equivalent percentage.

  1. Under the 2019 regulation, 10 × 7.50 − 2.5 = 75.0 − 2.5 = 72.5%.
  2. Under the 2024 regulation, 10 × 7.50 = 75.0%.
  3. The CGPA itself is identical. Only the reporting formula differs, by 2.5 percentage points.

Result: 72.5% under the 2019 regulation and 75% under the 2024 regulation, from an identical CGPA of 7.50.

Check which regulation your admission year falls under before quoting a percentage to anyone.

Questions students ask

How is SGPA calculated at KTU?

SGPA is the sum of (credit × grade point) for every course in the semester, divided by the sum of the credits for those courses. It is a credit-weighted average, not a simple average of grades.

How is CGPA different from SGPA?

The formula is identical. SGPA covers the courses of one semester, while CGPA covers all courses in the curriculum up to the semester for which the CGPA is computed.

Do failed courses affect my CGPA?

Yes. Both regulations require failed and incomplete courses to be included in the calculation with a grade point of 0, and they stay in the denominator at full credit weight. Under the 2024 regulation, courses where credits could not be earned under the credit relaxation policy are also assigned a grade point of 0.

What does FE do to my average?

FE carries 0 grade points, exactly like F and Ab, so it has the same effect on SGPA and CGPA. The difference is what it means procedurally: FE indicates the eligibility criteria were not met, or a CIE-only course was failed.

How do I convert CGPA to a percentage?

The 2019 regulation uses 10 × CGPA − 2.5. The 2024 regulation uses 10 × CGPA. A CGPA of 7.5 gives 72.5% under 2019 and 75% under 2024.

Are Minor and Honours credits counted in my CGPA?

The 2024 regulation states at R 9.3(ii) that courses pursued towards a Minor or Honours specialization, and credits earned through challenge examinations, are not included in the SGPA or CGPA for the main B.Tech programme. Note that R 3.4 contains a related clause about Honours theory credits and the SGPA and CGPA, so raise this with your faculty advisor if it affects your own case.

How is CGPA calculated for lateral entry students?

Credits for the first and second semester courses are not included in the CGPA calculation. The Consolidated Grade Card and official transcript include a statement that a total of 44 credits have been awarded based on the credits earned from the qualifying Diploma or Degree Programme.

How many decimal places does KTU use for CGPA?

Two. The 2024 regulation states at R 9.4 that GPA and CGPA shall be calculated to two decimal places.

Sources

Every number on this page is quoted from the documents below. Affiliated-college copies are reference copies; start from the official KTU pages for the authoritative version.

  • B.Tech (Regular) Academic Regulations, 2019 University regulation · APJ Abdul Kalam Technological University · link checked 2026-09-27Reference copy of the KTU B.Tech (Regular) Academic Regulations, 2019, hosted by an affiliated college. Clause numbers (R6.6, R7, R8.1, R8.2) refer to this document.
  • B.Tech (Regular) Academic Regulations, 2024 University regulation · APJ Abdul Kalam Technological University · link checked 2026-09-27Reference copy of the KTU B.Tech (Regular) Academic Regulations, 2024, hosted by an affiliated college. Clause numbers such as R 6.1 and R 7.1 refer to this document.
  • Regulations & Syllabus — Scheme B.Tech Official university page · APJ Abdul Kalam Technological University · link checked 2026-09-27Start here for the authoritative regulation and scheme documents. The KTU site is a JavaScript application, so document links open from the rendered page.

Please note. KTU Easy Notes is an independent educational resource and is not affiliated with, endorsed by, or officially connected to APJ Abdul Kalam Technological University. University regulations, notifications and academic requirements may change. Always verify important decisions against the applicable official KTU regulation or notification.