2019 and 2024 B.Tech RegulationsAcademic rulesReviewed 2026-09-28

KTU Internal Marks: CIE, Weightage and How They Are Calculated

Internal marks are the Continuous Internal Evaluation (CIE) part of your course grade, assessed during the semester. The two regulations weight them very differently: 2019 gives 30% of a theory mark to the end semester exam, while 2024 gives 40%. Under 2024, attendance itself earns marks on a stepped scale, and CIE marks are published at least seven days before the exam so you can query them.

On this page

What internal marks actually are

Internal marks are the Continuous Internal Evaluation (CIE) component of a course grade. They are assessed during the semester, while you are still in class, and they are added to your end semester exam mark to produce your final grade for the course.

Neither regulation fixes a single number called "internal marks". What it fixes is the ratio between CIE and the end semester exam, and then the weightage inside the CIE itself. Your course syllabus fills in the remaining detail, such as exactly how many tests and assignments there are.

How the marks are split by course type

The ratio decides what share of the final course mark your internal work can contribute. This is the number to check first, because it caps everything else.

Course type2019 B.Tech Regulation2024 B.Tech Regulation
TheoryCIE : ESE = 1 : 2 (R6.3)CIE : ESE = 2 : 3 (R 7.3)
LaboratoryCIE : ESE = 1 : 1 (R6.3)CIE : ESE = 1 : 1 (R 7.3)
PBL courseNot listed in R6.3.CIE : ESE = 3 : 2 (R 7.3)
HMC courseNot listed in R6.3.CIE : ESE = 1 : 1 (R 7.3)
ProjectCIE only (R6.3)CIE only (R 7.3)
InternshipNot listed in R6.3.CIE only (R 7.3)
SeminarCIE only (R6.3)CIE only (R 7.3)

Read that first row carefully. In 2019 a theory course is one third internal; in 2024 it is two fifths. For a 50-mark theory course that is the difference between an internal contribution of about 16.7 marks and 20 marks at full marks.

How 2019 weights your course work

The 2019 regulation is specific. CIE runs on day-to-day work, periodic tests of which there must be a minimum of two in a semester, and assignments of which there must also be a minimum of two. Unless the curriculum says otherwise, the course work is divided like this:

CourseAttendanceTestsAssignment / class work / project
Theory20%50%30%
Drawing / practical20%40%40%

The internal tests are specified too: a minimum of two tests, each of two hours, each covering 50% of the syllabus, and each for 50 marks. A retest is permitted for students who could not appear for a genuine reason, and three days are allotted for conducting the internal evaluation test.

How 2024 weights your course work

The 2024 regulation is broader and less prescriptive about the individual parameters. It says CIE may be based on day-to-day work, periodic tests, assignments, case studies, activities, micro projects, mini projects, MCQ and quiz, and that the pattern and weightage for each parameter is detailed in the syllabus of each course. So the split between tests and assignments under 2024 comes from your syllabus, not from the regulation.

What the regulation does fix is the internal written examination and the attendance marks:

  1. Internal written examination: conducted as specified in the syllabus, of 2 hours duration, carrying a total of 40 marks.
  2. If there are two written examinations, each test covers 50% of the syllabus.
  3. Retests are permitted for students with valid reasons, conducted immediately after the completion of the second internal examination, with a timetable officially published by the college examination cell.
  4. Attendance marks are awarded within CIE on the stepped scale below.
Course attendanceAttendance marks awarded
85% and aboveFull CIE marks for attendance
Above 80% but less than 85%4 marks
Above 75% but less than 80%3 marks
Above 70% but less than 75%2 marks
Above 60% but less than 70%1 mark
Below 60%0 marks

When marks are published, and how to query them

Both regulations build in a window for you to check your marks before they become final, and the 2024 regulation tightens the timing considerably.

Step2019 B.Tech Regulation2024 B.Tech Regulation
Display before uploadNot specified in these clauses.Internal marks, course-wise attendance percentages and activity points shall be uploaded to the University portal only after being displayed on the department notice board for at least two working days (R 5.6).
Publication deadlineNot specified in these clauses.CIE marks for all courses in a semester shall be published at least 7 days before the commencement of the end semester written examinations (R 7.7).
Window to complainNot specified in these clauses.Complaints must be submitted individually by the student to the faculty handling the course and to the Senior Faculty Advisor, within two days of publication (R 7.7).
Who resolves itNot specified in these clauses.The Head of Department, UG Dean and Principal shall ensure genuine complaints are promptly addressed and resolved (R 7.7).
Where else concerns goNot specified in these clauses.Concerns may be raised in class committee meetings, with resolutions ensured by the HoD / Dean / Principal (R 5.6).
RecordsNot specified in these clauses.The SFA shall maintain minutes and action taken reports for all meetings, approved by the HoD and Principal, available to academic auditors and the University on request (R 5.6).

Can internal marks be improved?

The 2024 regulation is unambiguous: there is no option for students to improve their Continuous Internal Evaluation marks. That is a direct answer, and it is different from the softer position implied by the 2019 clauses, which do not state a matching prohibition.

There is one exception, and it is not available to individual students. R 7.8 provides that in exceptional situations the University may conduct the CIE where it finds significant procedural lapses or major discrepancies, identified by the Syndicate, that have substantially impacted the evaluation process for an entire class at an affiliated institution. The University defines the procedure, which may include re-assessment or other appropriate methods, and revised marks are then updated in the final grade. The decision of the University is final.

How internal marks affect whether you pass

A course is passed on the combined CIE and ESE score, not on internal marks alone. The pass rules are the same in both regulations:

Rule2019 B.Tech Regulation2024 B.Tech Regulation
End semester exam minimum40% in the ESE (R6.12).40% in the ESE (R 7.17(i)).
Combined minimum50% of CIE and ESE put together (R6.12).50% in the combined score of CIE and ESE (R 7.17(i)).
Grade awarded on failureF if the ESE is below 40% or the overall is below 50% (R6.12).F if the overall mark (CIE + ESE) is below 50% (R 7.17(ii)).
CIE-only coursesProject and seminar are CIE only (R6.3).Project, internship and seminar are CIE only (R 7.3); the pass minimum is 50% (R 7.17(iii)).
Failure grade in a CIE-only courseNot stated as a separate grade in these clauses.FE is awarded instead of F where the student has not achieved a passing grade or minimum attendance eligibility in a CIE-only course (R 7.18).
Retaking a failed courseAppear for the ESE at the next opportunity; re-registration for the same course is not permitted (R6.13).Appear for the ESE at the next available opportunity to earn the credits; re-registration for the same course is not permitted (R 7.19).

The practical consequence is that internal marks are necessary but not sufficient. A student with full internal marks still fails if the ESE is below 40%, because R6.12 and R 7.17 make the exam minimum a separate condition rather than part of the combined total.

CIE to ESE ratio by course type, both regulations

Course type2019 B.Tech Regulation2024 B.Tech Regulation
Theory1 : 22 : 3
Laboratory1 : 11 : 1
PBL courseNot listed3 : 2
HMC courseNot listed1 : 1
ProjectCIE onlyCIE only
InternshipNot listedCIE only
SeminarCIE onlyCIE only

Worked examples

What the difference means for one 50-mark theory course

A theory course carries 50 marks in total. The same student scores the same raw performance in both cases: full internal attendance and internal work, and 25 out of 50 in the end semester exam.

  1. Under the 2019 regulation the theory ratio is 1 : 2, so internal work is one third of the 50 marks, about 16.67 marks, and the end semester exam is about 33.33 marks.
  2. At full internal marks that is 16.67 internal, and 25 of 33.33 in the exam, which is 75% of the exam component, so 25 / 33.33 × 33.33 = 25 marks counted toward the total.
  3. The combined mark is therefore about 41.67 out of 50, which is 83.3%. The exam mark percentage of 75% is above 40%, and the combined is above 50%, so the student passes.
  4. Under the 2024 regulation the theory ratio is 2 : 3, so internal work is 20 marks and the end semester exam is 30 marks.
  5. At full internal marks that is 20 internal, and 25 of 30 in the exam, which is 83.3% of the exam component, so 25 marks counted toward the total.
  6. The combined mark is 45 out of 50, which is 90%. The exam percentage is above 40% and the combined is above 50%, so the student passes with a higher total for identical raw performance.

Result: The same raw performance yields roughly 83.3% under 2019 and 90% under 2024, because 2024 shifts 6.67 marks of the total from the exam into the internal component.

This is why copying an internal-mark target from a senior under the other regulation is unreliable. The denominator itself has changed.

Questions students ask

What is CIE at KTU?

Continuous Internal Evaluation. It is the internal assessment component of a course grade, carried out during the semester on day-to-day work, tests, assignments and related activity. It is added to the end semester exam mark to give the final course grade.

What is the internal to exam ratio for a theory course?

The 2019 regulation sets CIE to ESE at 1 : 2, so internal marks are about 33.3% of a theory course. The 2024 regulation sets it at 2 : 3, so internal marks are 40% of a theory course.

How are internal marks weighted in the 2019 regulation?

For a theory course, attendance carries 20%, tests 50%, and assignment, class work or project 30%. For a drawing or practical course, attendance carries 20%, tests 40%, and assignment, class work or project 40%. There must be a minimum of two tests and two assignments in a semester.

Do I get marks for attendance inside my internal marks?

Under the 2024 regulation, yes. Full CIE attendance marks are awarded at 85% course attendance or above, then reduce stepwise to 4, 3, 2 and 1 marks down through the bands, and zero below 60%. Duty leave and special leave are considered when awarding these marks.

Can I improve my internal marks?

No. The 2024 regulation states there shall be no option for students to improve their Continuous Internal Evaluation marks. The single exception is class-wide, where the University may re-run CIE after the Syndicate identifies significant procedural lapses or major discrepancies affecting an entire class.

When are internal marks published?

Under the 2024 regulation, CIE marks for all courses in a semester shall be published at least 7 days before the end semester written examinations begin. Before upload to the portal, internal marks, course-wise attendance and activity points must be displayed on the department notice board for at least two working days.

How do I complain about an internal mark?

Under the 2024 regulation, submit the complaint individually to the faculty handling the course and to the Senior Faculty Advisor within two days of publication. The Head of Department, UG Dean and Principal are responsible for ensuring genuine complaints are resolved.

Do good internal marks guarantee a pass?

No. Both regulations require 40% in the end semester exam as a separate condition, in addition to 50% in the combined CIE and ESE total. A student can pass the combined requirement and still fail on the exam component, and vice versa.

Sources

Every number on this page is quoted from the documents below. Affiliated-college copies are reference copies; start from the official KTU pages for the authoritative version.

  • B.Tech (Regular) Academic Regulations, 2019 University regulation · APJ Abdul Kalam Technological University · link checked 2026-09-27Reference copy of the KTU B.Tech (Regular) Academic Regulations, 2019, hosted by an affiliated college. Clause numbers (R6.6, R7, R8.1, R8.2) refer to this document.
  • B.Tech (Regular) Academic Regulations, 2024 University regulation · APJ Abdul Kalam Technological University · link checked 2026-09-27Reference copy of the KTU B.Tech (Regular) Academic Regulations, 2024, hosted by an affiliated college. Clause numbers such as R 6.1 and R 7.1 refer to this document.
  • Regulations & Syllabus — Scheme B.Tech Official university page · APJ Abdul Kalam Technological University · link checked 2026-09-27Start here for the authoritative regulation and scheme documents. The KTU site is a JavaScript application, so document links open from the rendered page.

Please note. KTU Easy Notes is an independent educational resource and is not affiliated with, endorsed by, or officially connected to APJ Abdul Kalam Technological University. University regulations, notifications and academic requirements may change. Always verify important decisions against the applicable official KTU regulation or notification.