KTU 2024 B.Tech Regulation: The Complete Student Guide
The 2024 regulation is the current rulebook for students admitted from 2024 onwards. It is a substantial rewrite rather than an edit, and it changes credit totals, attendance relaxations, internal assessment thresholds and the CGPA to percentage formula.
On this page
- The credit relaxation policy: 160 credits can be enough
- Programme duration, the grace period and silent cancellation
- What is genuinely new in 2024
- Programme size and the credit conversion
- The academic year and the calendar
- Attendance in the 2024 regulation
- Internal assessment in 2024
- Grading, pass criteria and the percentage formula
- Activity points in 2024
- Honours, Minor and MOOC in 2024
- Degree requirements and the overriding clause
The credit relaxation policy: 160 credits can be enough
R 3.3 is the single most consequential change for a student who falls behind, and it is easy to miss because it is buried in the structure section. It introduces a Credit Relaxation Policy that exists so that a student missing a handful of credits is not permanently locked out of the degree.
- Students who acquire at least 160 credits, being 157 academic credits plus the 3 mandatory student activity credits, after the normal eight semesters are eligible for the B.Tech. Degree.
- The policy allows graduation even where a student cannot earn credits for courses totalling up to 10 credits.
- It does not apply to Seminar, Mini Project, or Project and Internship. Those are mandatory and must be completed to qualify for graduation.
- Credits earned for a Minor are not counted towards the 160-credit minimum. This is the opposite of Honours, and it matters when you plan your registration load.
- For any course where credits could not be earned under the policy, a grade point of 0 is assigned and factored into both SGPA and CGPA.
R 3.4 explains how the extra credits can be counted, and closes with a catch. Where a student has acquired the minimum 160 credits, the additional credits earned from Honours theory courses, along with 2 additional credits from Level 5 courses, may be considered towards fulfilling the 170-credit requirement for the regular degree. Where a student has not acquired 160 credits, those same credits count towards the 160 requirement instead. Either way the additional credits are included in the calculation of both SGPA and CGPA.
Programme duration, the grace period and silent cancellation
R 3.1 sets the normal duration at 4 years or 8 semesters. R 4.1 then governs what happens afterwards, and it contains the most alarming sentence in the regulation for anyone with backlog.
- If a student has backlog courses remaining after the normal four-year duration, the student will be permitted an additional grace period of two years to complete all courses and credit requirements specified in the curriculum.
- After this period the student's registration will be automatically cancelled unless an extension is granted by the University. No separate intimation regarding this cancellation will be sent to the student.
- At the end of the permitted duration, students will no longer be able to register for courses or exams on the KTU portal. They may still apply for certificates, result revaluation, cancellation or migration, and other portal activities permitted by the University.
That is why the credit, attendance and registration rules elsewhere in this regulation are worth reading as a set. The 160-credit floor in R 3.3 is the finish line, R 6.1 and R 7.32 decide whether you may keep moving towards it, and R 4.1 decides how long you have once you get there late.
What is genuinely new in 2024
The 2024 regulation is not a light revision. It restructures the programme and changes numbers that affect real academic outcomes. If you are a 2024 batch, the 2019 numbers are not a useful fallback, they are simply the wrong rulebook.
| Item | 2019 B.Tech Regulation | 2024 B.Tech Regulation |
|---|---|---|
| Total credits | 160 academic + 2 pass/fail = 162 (R3.6) | 167 academic + 3 activity = 170 (R 3.12) |
| Credits per semester cap | 8 above the semester mandatory total (R6.9) | 15 above the semester mandatory total (R 3.42) |
| Menstrual leave relaxation | Not stated in these clauses | 2%, lowering the requirement to 73% (R 6.1, R 7.10) |
| PWD relaxation | Not stated in these clauses | 5%, lowering the requirement to 70% (R 6.1, R 7.10) |
| Duty leave and related rules | Duty leave up to 10% (R8.2) | Duty leave up to 10% (R 6.3); organising activities up to 10% (R 6.4); special leave (R 6.5) |
| Full CIE attendance marks threshold | 90% or above (R6.4) | 85% or above, with a stepped table below (R 7.5) |
| CIE marks published before ESE | At least 5 days (R6.4) | At least 7 days (R 7.7) |
| CIE grievance window | Not stated in these clauses | Within 2 days of publication, to the faculty and the SFA (R 7.7) |
| Activity points | 100 points, or 75 lateral entry (R6.23) | 120 with at least 40 per group, or 90 with 30 per group for lateral entry (R 10.1) |
| Activity credits | 2 pass/fail credits | 3 activity credits inside the 170 (R 3.12) |
| Minimum CGPA to be awarded the degree | Not specified in R6.10 | Minimum CGPA of 5.0 with at least 160 credits (R 11.1) |
| CGPA to percentage equivalent | 10 x CGPA - 2.5 | 10 x CGPA (R 9.5) |
| Absent-with-eligibility grade | I grade (grade table) | Ab grade (R 7.16, grade table) |
| Minimum average attendance to advance a semester | Not stated in these clauses | 40% average attendance in the current semester (R 7.32) |
| Honours minimum CGPA at S8 | 8.5 (R12.1) | 8.0 (R 16.1) |
| Honours additional credits | 20 (R12.4) | 15 (R 16.2) |
| Minor additional credits | 20 (R11.4) | 15 (R 15.8) |
| Grade improvement | No provision | Explicitly not permitted (R 7.29) |
Programme size and the credit conversion
R 3.12 is the credit clause. The academic programmes of the University are based on a credit system, and the curriculum for any branch of the B.Tech programme shall comprise a total of 170 credits, which includes 167 academic credits and 3 mandatory student activity-based credits.
R 3.12 then gives the general credit allocation pattern, which is how weekly hours turn into credits:
| Weekly allocation | Credits |
|---|---|
| 1 hour of Lecture (L) per week | 1 credit |
| 1 hour of Tutorial (T) per week | 1 credit |
| 2 hours of Practical (P) or Project (R) per week | 1 credit |
| 3 to 4 hours of Seminar (S), Practical (P) or Project (R) per week | 2 credits |
| 1 project hour (R) in Project-Based Learning (PBL) per week | 1 credit |
R 3.14 adds self-study hours on top of contact hours, calculated as SS Hours = 1.5 L + 0.5 T + 0.5 P + R. These are the hours you are expected to work independently, and they are why a 3-credit lecture course realistically costs more than 3 hours a week.
R 3.41 contains a specific override worth knowing: HMC courses offered in the first year and the eighth semester shall be awarded a single credit, irrespective of the number of hours allotted per week.
The academic year and the calendar
R 3.5 sets the shape of the year. Every academic year is structured to include an Odd semester, an Even semester and a Summer semester. The Summer semester, typically scheduled during the months of May and June, provides students with the opportunity to engage in internships or pursue additional skill courses. Each semester shall have a minimum of 90 working days out of which 65 days shall be instructional days, and holidays declared by the district collector or the state government must be rescheduled within the same semester, including Saturdays.
R 3.6 lists what the academic calendar must publish, and that list is your filing system: commencement and completion of the semester, semester enrolment dates, course selection and mapping dates, University exam registration dates, the schedule of internal examinations, the date of publishing attendance and internal marks, the schedule of end semester examinations, dates of extra and co-curricular activities, submission of student activity points, dates of internal and external academic audit, and internship and vacation dates.
Attendance in the 2024 regulation
R 6.1 is the most changed part of the regulation. Students are expected to attain 100% attendance for all courses, but under unavoidable circumstances they are permitted to take leave, provided total absence does not exceed 25% of the academic contact hours for a course. A minimum of 75% attendance is mandatory to be eligible to appear for the end semester examination.
On top of that baseline, 2024 adds recognitions that did not exist in 2019. A 2% relaxation in attendance shall be granted to eligible students as menstrual leave, and a 5% relaxation shall be granted to students with disabilities. The regulation also requires that students be informed about their attendance status periodically by the colleges, so that they can be cautioned to make up the shortage.
R 7.10 makes the effect on eligibility explicit: the 2% relaxation reduces the required attendance to 73% for each course, and the 5% relaxation lowers it to 70%.
| Category | Relaxation | Effective attendance needed for ESE eligibility |
|---|---|---|
| No relaxation | None | 75% |
| Menstrual leave | 2% (R 6.1) | 73% (R 7.10) |
| PWD | 5% (R 6.1) | 70% (R 7.10) |
| Duty leave, official events | Up to 10% (R 6.3) | Relaxed by the sanctioned amount |
| Organising extra or co-curricular activities | Up to 10% (R 6.4) | Relaxed by the sanctioned amount |
| Condonation by the Principal | Discretionary, for 60% to under 75% (R 6.2) | As approved, with a fee per course |
Internal assessment in 2024
R 7.5 sets out CIE. It shall be conducted based on day-to-day work, periodic tests, assignments, case studies, activities, micro projects, mini projects, MCQ and quiz. The evaluation pattern and weightage for each parameter shall be detailed in the syllabus of each course included in the curriculum.
That last sentence matters more than it looks. The regulation does not fix a single CIE to ESE ratio for every course. The weightage is a property of the individual course syllabus, so to know your exact internal split for a subject you read that subject's syllabus rather than assuming a university-wide ratio.
R 7.5 does fix two things precisely. The internal written examination shall be conducted as specified in the syllabus, the duration shall be 2 hours and it shall carry a total of 40 marks. If there are two written examinations, each test shall cover 50% of the syllabus. Retests are permitted for students with valid reasons and should be conducted immediately after the completion of the second internal examination, with a timetable officially published by the college examination cell.
The CIE attendance component also changed. Full CIE marks for attendance are awarded at 85% or above, and below that a stepped reduction applies instead of the proportional reduction used in 2019.
| Attendance in the course | CIE attendance marks (2024) |
|---|---|
| 85% and above | Full marks |
| Above 80% but less than 85% | 4 marks |
| Above 75% but less than 80% | 3 marks |
| Above 70% but less than 75% | 2 marks |
| Above 60% but less than 70% | 1 mark |
| Below 60% | 0 marks |
Duty leave or special leave shall be considered when awarding internal marks for attendance, so approved leave does not cost you the attendance component of your internal assessment.
Grading, pass criteria and the percentage formula
R 7.21 gives the grade table. S is 10 for 90% and above, A+ is 9.0 for 85% to under 90%, A is 8.5 for 80% to under 85%, B+ is 8.0 for 75% to under 80%, B is 7.5 for 70% to under 75%, C+ is 7.0 for 65% to under 70%, C is 6.5 for 60% to under 65%, D is 6.0 for 55% to under 60%, P (Pass) is 5.5 for 50% to under 55%, and F, FE and Ab are each 0.
R 7.17 sets the pass criteria: the pass minimum for a course shall be 40% in the End Semester Examination and 50% in the combined score of CIE and ESE. For courses assessed solely through CIE, the pass minimum shall be 50%, and a student who does not achieve a passing grade or minimum attendance eligibility in a CIE-only course is awarded an FE grade instead of an F grade (R 7.18).
R 9.5 states the percentage equivalent: the percentage equivalent of a CGPA is calculated by multiplying the CGPA by 10, and the regulation gives the worked example that a CGPA of 8.95 is considered equivalent to 89.5%. The 2019 offset of 2.5 points does not apply. Degree classification follows the same table, with First Class with Distinction at CGPA 8.0 and above and First Class at CGPA 6.5 up to but below 8.0.
Activity points in 2024
R 10.1 is much more prescriptive than its 2019 counterpart. A student must earn 3 credits by actively participating in co-curricular and extra-curricular activities, in accordance with the guidelines issued by the University from time to time. The required activity points must be earned from 3 designated groups, as specified in the B.Tech curriculum.
For regular B.Tech students, 120 activity points are required, with at least 40 points earned from each specified group, to fulfil the curriculum requirement of 3 activity credits. For lateral entry students, 90 activity points are required, with at least 30 points from each designated group. Inter-university and scheme migration students shall earn a minimum of 5 points per semester in each specified group during their period of study at KTU. Students are required to maintain a file containing documentary proof of the activities they have participated in, attested by the Senior Faculty Advisor or Faculty Advisor.
Honours, Minor and MOOC in 2024
R 16.1: all B.Tech students are eligible to register for B.Tech (Honours), the registration shall be along with the registration of the 4th semester, and to qualify for the award the student must achieve a CGPA of 8 or higher at the end of the eighth semester. R 16.2 requires an additional 15 credits, distributed as 4 credits in semester 4, 4 in semester 5, 4 in semester 6 and 3 in semester 7.
R 16.3 requires that out of the 15 credits, 4 credits must be earned by completing the first theory course listed in the Honours curriculum. The remaining 11 credits can come from MOOCs, theory courses in the Honours curriculum, a combination of the two, or additional credits at 2 credits per Level 5 elective course completed from semester 4 to semester 8, or a combination of these.
The Minor sits in R 15. R 15.3: all B.Tech students are eligible, registration is permitted at the beginning of the third semester, a student can opt for only one minor specialisation, once registered it cannot be changed, and a minimum enrolment of 15 students is required for a minor programme to be offered. R 15.8 requires an additional 15 credits, distributed as 4 in semester 3, 4 in semester 4, 4 in semester 5 and 3 in semester 6.
R 17 governs MOOCs. A MOOC is valid only if it is conducted by agencies such as AICTE, NPTEL, SWAYAM, NITTTR, or other agencies approved by the Academic Council. The MOOC should have a minimum duration of 8 weeks, should be taught in online mode, and should include a proctored or offline End Semester examination. At least 70% of the course content should match the area of study addressed by the concerned Minor, Honours or Major course.
R 16.9 states that grace marks shall not be awarded for Honours courses, and R 19.2 confirms that grace marks are not awarded for MOOCs and Challenge courses.
Degree requirements and the overriding clause
R 11.1 sets the award requirements: a student shall be eligible for the award of a B.Tech Degree upon fulfilling all the curriculum requirements within the stipulated duration of the programme, holding a minimum CGPA of 5.0 and at least 160 credits including the 3 credits from Activity Points, and having no pending disciplinary actions.
Note the tension inside that clause. The curriculum is 170 credits, but only 160 are required for the award. The difference is deliberate headroom, so a student can carry some backlog courses through the programme while still qualifying on time. Read it as a floor, not a target.
R 11.2 is the administrative gate: the Degree Certificate, Provisional Certificate, Consolidated Grade Card and Migration or Cancellation certificates shall be issued only after the candidate has settled all dues to the University.
R 7.31 makes registration mandatory in strong terms: all students are required to register for the prescribed credits in each regular semester unless they are on authorized leave, course registration and exam registration as per the dates in the academic calendar are mandatory for every student, and a student who fails to complete both for all the courses listed in the curriculum for a given semester will not be eligible to enrol in the next higher semester.
R 7.32 then adds the attendance gate on promotion, and it carves out one transition. There shall not be any restriction for promotion from an odd semester to the next even semester, provided the student has fulfilled the minimum attendance requirement and Regulation 7.31(iii). In plain terms the 40% average attendance bar bites hardest on the jump from an even semester into the next odd semester, which is where the longer stretch of study falls.
R 26.1 is the clause to remember when rules seem to change under you: notwithstanding anything contained in these regulations, the appropriate statutory bodies of the University shall have the power to amend, modify or repeal any of these regulations from time to time.
Key numbers in the 2024 B.Tech regulation
| Item | 2024 value | Clause |
|---|---|---|
| Total credits | 167 academic + 3 activity = 170 | R 3.12 |
| Credit relaxation floor for the degree | 160 credits (157 academic + 3 activity), allowing a shortfall of up to 10 credits | R 3.3 |
| Excluded from credit relaxation | Seminar, Mini Project, Project and Internship; Minor credits do not count towards the 160 | R 3.3 |
| Effect of unearned credits on CGPA | Grade point 0 assigned and counted in SGPA and CGPA | R 3.3 |
| Cost of credit consideration | Not eligible for the degree with Honours | R 3.4 |
| Normal duration | 4 years, 8 semesters | R 3.1 |
| Grace period after the normal duration | Additional 2 years, then registration is cancelled automatically with no separate intimation | R 4.1 |
| Self-study hours formula | SS Hours = 1.5 L + 0.5 T + 0.5 P + R | R 3.14 |
| HMC credit override | First year and eighth semester HMC courses are 1 credit regardless of weekly hours | R 3.41 |
| Minimum attendance for ESE eligibility | 75% per course | R 6.1, R 7.10 |
| Menstrual leave relaxation | 2%, effective threshold 73% | R 6.1, R 7.10 |
| PWD relaxation | 5%, effective threshold 70% | R 6.1, R 7.10 |
| Absence ceiling | 25% of academic contact hours for a course | R 6.1 |
| Condonation band | At least 60% and under 75%, at most 2 semesters, with a fee | R 6.2 |
| Duty leave for official events | Up to 10% | R 6.3 |
| Minimum working days per semester | 90 working days, 65 instructional | R 3.5 |
| Course registration cap | 15 credits above the semester mandatory total | R 3.42 |
| Minimum cumulative credits to register for S5 | 18 credits from S1 and S2 | R 7.30 |
| Minimum cumulative credits to register for S7 | 37 credits from S1 to S4 | R 7.30 |
| Minimum average attendance to advance a semester | 40% | R 7.32 |
| Pass minimum, ESE | 40% | R 7.17 |
| Pass minimum, CIE + ESE | 50% | R 7.17 |
| Pass minimum, CIE-only courses | 50% | R 7.17 |
| Internal written examination | 2 hours, 40 marks | R 7.5 |
| Full CIE attendance marks threshold | 85% or above | R 7.5 |
| CIE marks published before ESE | At least 7 days | R 7.7 |
| CIE grievance window | Within 2 days of publication | R 7.7 |
| Activity points, regular | 120, at least 40 per designated group | R 10.1 |
| Activity points, lateral entry | 90, at least 30 per designated group | R 10.1 |
| Minimum CGPA for the degree award | 5.0 | R 11.1 |
| Minimum credits for the degree award | 160 including 3 activity credits | R 11.1 |
| CGPA to percentage equivalent | 10 x CGPA | R 9.5 |
| Honours minimum CGPA at S8 | 8.0 | R 16.1 |
| Honours additional credits | 15, split S4 4 / S5 4 / S6 4 / S7 3 | R 16.2 |
| Minor additional credits | 15, split S3 4 / S4 4 / S5 4 / S6 3 | R 15.8 |
| Minor minimum enrolment | 15 students | R 15.3 |
| Grade improvement | Not permitted | R 7.29 |
| Grace marks for PWD | 25% of marks scored, capped at the course maximum | R 19.2 |
| Grace marks for Honours, MOOCs, Challenge | Not awarded | R 16.9, R 19.2 |
Worked examples
Applying a PWD relaxation to an eligibility test
You are a PWD student under the 2024 regulation with 68% attendance in a course, and no other relaxation claimed.
- The base requirement is a minimum of 75% attendance for each course (R 7.10).
- R 7.10 grants PWD students a 5% relaxation, lowering the minimum required attendance to 70% for each course.
- Compare your 68% against the relaxed threshold of 70%, not the base 75%.
- 68% is below 70%, so the PWD relaxation alone does not make you eligible.
Result: You are not eligible for the ESE in that course on attendance grounds. Because 68% is above the 60% condonation floor, you can still apply to the Principal for condonation under R 6.2, which is discretionary, limited to two semesters in the programme, and carries a fee per course.
Relaxations and condonation are different tools. A relaxation follows from your category; condonation is an approval you have to request.
Converting a 2024 CGPA to a percentage
You finish under the 2024 regulation with a CGPA of 8.95 and want the equivalent percentage.
- R 9.5 states the percentage equivalent of a CGPA is calculated by multiplying the CGPA by 10.
- Multiply: 8.95 x 10 = 89.5.
- There is no offset to subtract under the 2024 regulation.
- Your equivalent percentage is 89.5%.
Result: CGPA 8.95 equals 89.5%. The regulation gives this exact worked example, which is a useful check that you are using the 2024 rule and not the 2019 formula of 10 x CGPA - 2.5.
Questions students ask
How many credits does the KTU 2024 B.Tech regulation require?+
170 credits in total: 167 academic credits plus 3 mandatory student activity-based credits (R 3.12). For the degree award itself, R 11.1 requires a minimum CGPA of 5.0 and at least 160 credits including the 3 activity credits.
Is there a difference between the 2019 and 2024 attendance rules?+
Yes, substantially. 2024 adds a 2% relaxation for menstrual leave, lowering the effective requirement to 73%, and a 5% relaxation for PWD students, lowering it to 70% (R 6.1, R 7.10). It also adds rules for organising activities (R 6.4) and special leave (R 6.5), and a 40% average attendance requirement to advance to the next higher semester (R 7.32).
What is the CIE to ESE ratio under the 2024 regulation?+
The regulation does not fix one ratio for all courses. R 7.5 states that the evaluation pattern and weightage for each parameter shall be detailed in the syllabus of each course included in the curriculum. Check the individual course syllabus for its split.
How is CGPA converted to a percentage in 2024?+
Multiply by 10. R 9.5 gives the example that a CGPA of 8.95 is equivalent to 89.5%. The 2019 regulation subtracted a further 2.5 points, and that offset does not apply under 2024.
Can I improve a grade in the 2024 regulation?+
No. R 7.29 states that students are not permitted to improve the grades of passed or successfully completed courses. A grade you have earned is final.
What are the three activity point groups?+
The regulation requires activity points to be earned from 3 designated groups as specified in the B.Tech curriculum, but does not itself name them. The group names and the points available in each are in the curriculum and the University activity guidelines, which are separate documents.
Sources
Every number on this page is quoted from the documents below. Affiliated-college copies are reference copies; start from the official KTU pages for the authoritative version.
- B.Tech (Regular) Academic Regulations, 2024 University regulation · APJ Abdul Kalam Technological University · link checked 2026-09-27Reference copy of the KTU B.Tech (Regular) Academic Regulations, 2024, hosted by an affiliated college. Clause numbers such as R 6.1 and R 7.1 refer to this document.
- Regulations & Syllabus — Scheme B.Tech Official university page · APJ Abdul Kalam Technological University · link checked 2026-09-27Start here for the authoritative regulation and scheme documents. The KTU site is a JavaScript application, so document links open from the rendered page.
- Regulation Amendments Official university portal · APJ Abdul Kalam Technological University · link checked 2026-09-27Published amendments to KTU regulations. Check this before relying on any rule, because regulations are amended after the original document.
Please note. KTU Easy Notes is an independent educational resource and is not affiliated with, endorsed by, or officially connected to APJ Abdul Kalam Technological University. University regulations, notifications and academic requirements may change. Always verify important decisions against the applicable official KTU regulation or notification.